Accessible shop design in NSW: what the DDA, BCA and Premises Standards mean for your fit-out
What the DDA, Premises Standards and BCA ask of a NSW shop fit-out: entrances, ramps, doorways, counters and toilets, plus the checks to make before you sign a lease.
KENURO architects
11/19/20265 min read


Around one in five Australians lives with a disability. For a shop, cafe or clinic, that is one in five potential customers, and it is also the law. If you are planning a fit-out in NSW, accessibility is not a nice-to-have that gets value-engineered out at the end. It shapes your entrance, your layout, your counter and your toilets, and it is checked as part of your approval.
Here is what the rules actually ask for, when they apply, and what to check before you sign a lease.
The three rulebooks
Three layers of regulation sit behind every accessible fit-out in NSW:
The Disability Discrimination Act 1992 (DDA) is Commonwealth law. It makes it unlawful to discriminate against a person with disability, including in access to premises and in the goods and services you provide. The DDA applies to your shop whether or not you ever renovate.
The Disability (Access to Premises - Buildings) Standards 2010, usually called the Premises Standards, sit under the DDA. They contain the Access Code, which lists the access features a public building must have when building work is done. The Premises Standards were amended on 23 November 2024, and the amended version took full effect on 29 July 2025.
The National Construction Code (NCC), still widely called the BCA, is what your certifier assesses your building work against. Its access provisions mirror the Access Code, and since July 2025 it references the 2021 edition of AS 1428.1, the Australian Standard for access and mobility. That standard is where the hard numbers come from: doorway widths, ramp gradients, circulation space and contrast.
In practice, your certifier checks your fit-out against the NCC, and because the NCC and the Access Code are aligned, a compliant approval also puts you on solid ground under the DDA.
When a fit-out triggers the rules
The Premises Standards apply to new buildings and to new work in existing buildings, which includes most shop fit-outs. Two points matter for tenants:
The affected part. When you build a new part in an existing building, the rules reach beyond your tenancy. The principal pedestrian entrance, and the accessible path from that entrance to your shop, come into scope. A stepped shopfront or an arcade entry can become part of your approval even though you are not otherwise touching it.
The lessee concession. In a multi-tenant building, a tenant applying for approval of their own tenancy is generally excused from upgrading the affected part. The concession does not apply where the whole building is leased to one person. Who ends up paying for entrance works is a lease question, so sort it out before you sign.
There is also a small-building concession: for Class 5 and 6 buildings (offices and shops) of no more than three storeys, where each upper floor is no more than 200 square metres, a lift or ramp to the upper floors may not be required. Other access features still apply.
What the rules ask of a shop
The common checkpoints on a retail or hospitality fit-out:
• Entrance. A step at the shopfront is the most common fail. AS 1428.1 allows a threshold ramp up to 35 mm high at a gradient of 1:8, a step ramp up to 190 mm at 1:10, and anything longer falls under full ramp rules: a gradient no steeper than 1:14, landings at the top and bottom and every 9 metres, and handrails on both sides.
• Doorways. A clear opening of at least 850 mm, enough circulation space to approach and open the door, and hardware positioned for someone reaching from a seated position.
• Paths of travel. A continuous accessible path at least 1000 mm wide, with a firm, slip-resistant surface, to and through every area customers normally use, including raised or sunken dining zones and mezzanines (subject to the small-building concession above).
• Counters. A section of the service counter low enough for a person using a wheelchair, not only a standing-height bench.


• Toilets. An accessible sanitary compartment where toilets are provided or required, with braille and tactile signage. The accessible toilet that doubles as a storeroom is a classic audit failure.
• Stairs and hazards. Tactile ground surface indicators where required, and luminance contrast, a minimum of 30 per cent between adjoining surfaces, on elements like doorways and stair nosings so people with low vision can read the space.
• Hearing augmentation where a room has inbuilt amplification, such as a function space.
"My shop is existing. Do the rules still apply?"
Yes, in two ways. The Premises Standards bite when you do building work, but the DDA itself applies all the time: if customers cannot get in, cannot reach the counter or cannot use the toilet, a complaint can be made to the Australian Human Rights Commission regardless of whether any renovation is planned. There is a defence of unjustifiable hardship, but it is a defence, not an exemption, and it is assessed case by case. Planning access improvements into a refit you are doing anyway is almost always cheaper than defending a complaint.
Approvals in NSW
Depending on scope, a shop fit-out goes through a development application (DA), a complying development certificate (CDC) or straight to a construction certificate (CC). Whichever pathway applies, the certifier checks the access provisions before work starts. Getting the access design resolved at drawing stage, rather than at inspection, is the difference between a smooth approval and a refit of the refit.
What it costs in Sydney
Indicative 2026 NSW figures, always site-dependent:
• Threshold ramp supplied and fitted: roughly $150 to $500
• Grab rails and minor bathroom upgrades: a few hundred dollars per item
• A compliant accessible toilet as part of a fit-out: typically from around $15,000, and $40,000 or more for a full rebuild
Retrofitting after the fact costs far more than designing it in, which is why access belongs in the first sketch, not the defects list.
Six checks before you sign a lease
1. Is there a step or steep ramp at the principal pedestrian entrance?
2. Is the building multi-tenant or single-tenant? (This decides who wears the entrance upgrade.)
3. Is there an existing accessible toilet, and does it comply?
4. Is any trading floor upstairs, and how large is it?
5. Will your use change the building classification, for example shop to cafe or shop to clinic?
6. Who carries the cost of entrance and path works under the lease?


How we can help
KENURO designs retail, hospitality, office, salon and clinic fit-outs across Sydney, and approvals, including access compliance, are part of every project we run. We review the entrance and path of travel at brief stage, so there are no surprises at certification.
Planning a fit-out? Book a free consultation and we will walk through your site together.
Commercial and Residential Architecture in Sydney
Studio
Cammeraygal Land
Suite 55 (Level5), 106 High Street, North Sydney, NSW 2060
+61 490 051 207
© 2026 KENURO architects
Practice registered under the NSW Architects Registration Board.
KENURO architects acknowledge the Traditional Custodians of country throughout Australia and their connections to land, sea and community. We pay our respect to their Elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.


NINE/36
A design guidebook for business owners planning a fit-out.
