Renovating or knocking down and rebuilding a Sydney home: costs, approvals and how to decide

The real comparison between renovation and knockdown rebuild in Sydney: cost per square metre, approval pathways, hidden risks and the questions that settle it. By KENURO architects.

KENURO architects

11/18/20262 min read

Rose Crescent home by KENURO architects, Sydney
Rose Crescent home by KENURO architects, Sydney

Every Sydney homeowner with an ageing house in a good street faces the same fork: renovate what stands, or demolish and build new. Both can be the right answer. Here is how the comparison actually runs.

The cost comparison

Sydney guides put current building costs in these ranges:

• Mid-range renovation (kitchen, bathroom, structural work): roughly $2,000 to $3,500 per square metre

• High-end renovation with premium finishes and custom joinery: $3,500 to $5,500 per square metre

• Second-storey addition: roughly $3,600 to $4,500 per square metre

• New individually designed brick veneer house, medium to high finish: roughly $2,800 to $4,250 per square metre plus GST, on current Rawlinsons Sydney rates

On those rates, a new 220 square metre house prices around $680,000 to just over $1 million including GST, before demolition, site works, approvals and the cost of living elsewhere while it is built.

The catch hides inside those numbers. A renovation rate looks competitive until the walls open and the real condition of the house appears: structural repairs, rewiring, replumbing and asbestos removal are the classic budget breakers, and none of them are visible at quoting stage. A rebuild has cost certainty that a renovation never fully offers, because once the old house is down, there are no surprises left standing.

The approval comparison

• Renovation can sometimes proceed as exempt or complying development if the works are modest and the controls allow, avoiding a DA entirely.

• Knockdown rebuild almost always needs either a Complying Development Certificate through a certifier or a Development Application to council. NSW DAs are currently determined in an average of about 83 days, but a new house in a conservation area, or one needing variations, will sit above that average.

• Heritage and conservation settings tilt the decision. In many Sydney suburbs, particularly across the North Shore and the eastern suburbs, demolition is restricted or refused outright, and renovation is the only path the planning controls leave open.

The questions that usually settle it

1. Are the bones good? Straight structure, sound footings and a layout close to what you want point to renovation. Warped framing, rising damp and a plan that fights you point to rebuild.

2. Does the site earn the new build? Rebuilding makes most sense when the land value and the controls allow a substantially better house than the one standing.

3. How much change do you actually need? A new kitchen, bathroom and reconfigured living areas is a renovation brief. New orientation, new ceiling heights, new everything is a rebuild brief wearing a renovation budget.

4. Where will you live? Renovations can sometimes be staged around occupation; a rebuild cannot. Renting elsewhere for 12 to 18 months is a real line in the rebuild budget.

5. What do the planning controls say? Before falling in love with either option, check zoning, floor space ratio, height and heritage status. The controls often make the decision for you.

The honest version

Renovation suits good bones, modest change and heritage settings. Rebuild suits poor bones, big change and sites that justify it. The expensive mistake is doing a rebuild's worth of work as a renovation, paying renovation rates for hidden surprises the whole way.

The right first step is a feasibility look at your actual house and your actual block, before any design starts.

Weighing up renovate versus rebuild? KENURO designs bespoke homes, renovations and multi-unit projects across greater Sydney. Book a free consultation and we will walk your site and talk through both paths.