Salon and barbershop fit-out costs in Sydney: what to budget
Current cost ranges for salon, barbershop and beauty fit-outs, what drives the number, and the design decisions that save money without looking cheap. By KENURO architects.
KENURO architects
11/18/20262 min read


Salon and barbershop fit-outs sit in an interesting cost band: cheaper per metre than a dental surgery or a commercial kitchen, but more services-heavy than a boutique. Here are current guide figures, what moves the number, and where design earns its keep.
Current cost ranges
Recent Sydney guides put a full salon fit-out in these ranges:
• Basic renovation of a small tenancy of 50 to 80 square metres: roughly $80,000 to $120,000
• Mid-range fit-out for a 100 to 150 square metre salon: roughly $150,000 to $200,000
• Premium fit-outs with high-end joinery, custom furniture and designer finishes: $250,000 and above
NSW shopfitting guides put the build component of hair and beauty fit-outs at roughly $800 to $1,500 per square metre, with premium Sydney retail joinery work reaching $2,000 to $4,500 per square metre. Chairs, basins and equipment sit on top of the build figure: quality backwash units alone run from about $1,500 to $6,000 each. Sydney consistently ranks among the most expensive fit-out markets in the country, driven by trade labour rates.
These are planning figures only: a real price needs drawings and quotes.
What moves the number
1. Plumbing points. Every basin and treatment room sink is water in and waste out, to a fixed position. Basins along one wet wall cost far less than basins scattered across the plan, which is why experienced salon design groups wet services together.
2. Ventilation and air quality. Chemical services, nail work and waxing need proper ventilation. It is both a comfort issue and a work health and safety one, and retrofitting it costs more than designing it in.
3. Electrical load. Dryers, wash basins, treatment devices and hot water all draw real power. Check the tenancy's supply capacity before you sign the lease.
4. Treatment rooms. Each enclosed room adds partitions, doors, acoustic treatment and often plumbing. Day spas sit at the top of the cost range for a reason.
Compliance is part of the budget
NSW beauty premises carrying out skin penetration procedures must be notified to the local council, and the fit-out needs to support the infection control standards that apply: washable surfaces, proper handwashing facilities and cleanable treatment areas. Getting this into the design from the start avoids council problems at opening.
Where design saves money
• Group basins and treatment rooms on shared walls to shorten plumbing runs
• Use custom joinery where clients look, standard components where they do not
• Mirror and light walls to make a compact tenancy feel generous, so you can lease smaller
• Plan the retail display near the counter and the waiting sightline, so product sells itself
For Fellow Barber, the design paired walnut-look cabinetry with planting and durable finishes to give a premium feel on a controlled budget. For Leah's Waxworks, we carried one recognisable design language across three Sydney stores, which keeps each new fit-out faster and more consistent than starting from scratch.
Planning a salon, barbershop or beauty space? KENURO designs wellness fit-outs across Sydney, from concept to handover. Book a free consultation and we will talk through your tenancy and your budget.
Commercial and Residential Architecture in Sydney
Studio
Cammeraygal Land
Suite 55 (Level5), 106 High Street, North Sydney, NSW 2060
+61 490 051 207
© 2026 KENURO architects
Practice registered under the NSW Architects Registration Board.
KENURO architects acknowledge the Traditional Custodians of country throughout Australia and their connections to land, sea and community. We pay our respect to their Elders past and present and extend that respect to all Aboriginal and Torres Strait Islander peoples today.


NINE/36
A design guidebook for business owners planning a fit-out.
