Dental surgery design requirements in NSW: the standards behind every compliant practice

Sterilisation flow, radiation shielding, accessibility and infection control: the requirements that shape a NSW dental fit-out, and how design handles them. By KENURO architects.

KENURO architects

11/18/20262 min read

Arnica Dental Care surgery by KENURO architects, Sydney
Arnica Dental Care surgery by KENURO architects, Sydney

A dental practice is one of the most regulated small buildings you can fit out. The layout is not just a style choice: patient flow, sterilisation, radiation and accessibility are all governed by standards, and the design has to satisfy all of them at once. Here is what shapes a compliant NSW dental surgery.

Sterilisation and reprocessing: AS 5369

Reusable dental instruments must be cleaned, packed and sterilised to AS 5369:2023, the current Australian standard for reprocessing reusable medical devices, which replaced AS/NZS 4187. In plan form that means a dedicated reprocessing area with a one-way flow from dirty to clean to sterile, the right sink and bench configuration, and washable surfaces throughout. The sterilisation room's size and position drive the whole surgery layout, so it is settled at concept stage, not fitted around the chairs afterwards.

Radiation: shielding and licensing

X-ray rooms are assessed against the NSW EPA's Radiation Guideline 7. Standard dental rooms at low workloads can often be self-assessed, while busier or larger imaging setups, such as OPG and CBCT units, need a formal shielding plan prepared by a qualified person before building starts. Shielding usually means lead-lined walls, doors and viewing windows at the imaging room. Separately, the practice needs a radiation management licence from the EPA before any apparatus is used, and the equipment must be registered. Both tracks run alongside the fit-out program.

Infection control

The Dental Board of Australia requires every practice to maintain accessible infection control documentation, and the physical design supports it: smooth, washable, impervious surfaces in clinical areas; hands-free or elbow-operated taps in treatment zones; and separation between clinical and non-clinical areas.

Accessibility: AS 1428.1 and the DDA

Entries, door widths, circulation, reception heights and amenities are designed to AS 1428.1 under the Disability Discrimination Act. For healthcare this is not optional polish: patients arrive with limited mobility, and an inaccessible practice is both a compliance problem and a clinical one.

The services behind each chair

Every surgery chair needs water, drainage, suction, compressed air, power and data brought to a fixed point. On a suspended slab that means core-drilling and routing through the tenancy below; on ground it means trenching. Suction plant and compressors need their own ventilated, acoustically treated space. The single best value decision in a dental fit-out is to rough in services for the surgery you will need in three years while the floor is already open.

What this looks like in practice

For Arnica Dental Care, a 63 square metre practice in a Victorian building in Darlinghurst, the existing patient base meant downtime was the enemy: every finish was confirmed in stock and bought in advance, long-lead items were pre-ordered, and the fit-out itself was completed in two weeks under a CDC. That speed came from compliance being resolved on paper before anyone touched the building.

Planning a dental, medical or wellness practice? KENURO designs healthcare fit-outs across Sydney and manages approvals end to end. Book a free consultation and we can walk your site before you sign.